Cctv video tester (NT120) (VV94):
Color video screen size 2.8 \"a resolution of 960 x 240. PTZ Control. Allows scrolling up and down (tilt), left and right (pan) and adjusting the zoom. Auto the video standard NTSC or PAL adaptation. SettingLCD parameters of brightness, contrast and color saturation. Generation patterns PAL and NTSC video systems. Generation of up to 7 letters of verification of multi-colored bars. RS485 data analysis allow technicians to locate faults in the CCTV system. Check function and identification of LAN cable. Multi-interface: supports RS232, RS422 and RS485 interfaces. Multi-baud: supports speeds of 150, 300, 600, 1200, 2400, 4800, 9600 and 19200 bps. Multi-protocol: supports up to 20 PTZ control protocols, highlighting the most popular as PELCO-P, PELCO-D, Samsung, etc.. Tracking PTZ address locates the identifier (ID) of the camera. Li-Ion 1400 mAh and 3.7 VDC. It incorporates an advanced power control and protection andlectric. Allows operation of up to 5 hours with a charge time of 5 hours. Necessary cables, power supply and CCTV tester equipment supplied. Connections and controls
Two sockets for input and BNC video output. For terminal connection (2-pin) for the RS485 signal. DB9 male connector for the RS232 signal. CoRJ45 female connector for testing UTP network cables. Remote terminator is supplied with RJ45 female connector. Switch ON/OFF. DC input connector 9 VDC jack for charging the device.
- Date de la mise en ligne du produit 10/06/2014
- Modifié par le vendeur 01/06/2016