Délai de livraison: 1 semaine
Produit non disponible
HDMI over Ethernet Extender (30m 1080p 2xUTP with hose) (HL52):
ID produit: 2048645
HDMI Extender or what is the same as a device that allows for longer HDMI cable without losing the signal. HDMI signal is transmitted through two cables UTP Category 5e or Category 6. Two modules are provided that have an HDMI connector hose ended male and two female RJ45 connectors (TMDS DDC). The UTP cable enables the transmission and distribution of the HDMI signal over distances greater than plus installation is easier and cheaper. Two modules are provided, the transmitter (sender) and receiver (receiver) that are interconnected with each other using two UTP cables.
HDMI over Ethernet
Réseaux et communications
HDMI Signal Extender allows to extend the total length of cable from source (video source) to destination (projector or flat screen) with two UTP Cat.5e or Cat.6. Allowing a maximum distance of 30m at 1080p using Cat 6 cables. Two modules are supplied small size (53 x 33 x 15 mm). The modules are small wire (jumper) finished in male HDMI connector. Each module has two RJ45 female connectors (TMDS and DDC) through which are interconnected using UTP cable. Supported Resolution: 1920 x 1200 and 1080. Supports HDMI 1.3, HDCP 1.0 and HDCP 1.1. VGA video formats supported: 640x480, 800x600, 1024x768 and 1920x1200. Video formats DTV/HDTV support: 480i, 576i, 480p, 576p, 720p, 1080i and 1080p. Frequency: 165 MHz No power supply required.